How can the safety factor of the advertising gate be enhanced?

2026-03-25 16:26:34

Regarding the safety issues of advertising gates, they are inevitable. There will be some safety problems to some extent. So, how can the safety coefficient of advertising gates be improved? The following editor will give us a detailed explanation. The specific methods are as follows: 

In order to improve the security level of the advertising gate: 

1. Enhance its own anti-collision function. During the planning and installation process of the advertising gate, it is necessary to set up deceleration devices at the entrances and exits, such as speed bumps, to prevent damage to the gate rods of the road gates due to the excessive speed of vehicles at the entrances and exits. 

2. For advertising gate manufacturers, improving the anti-bump ability of the door frame is of great significance. For instance, through the floor sensor trigger, if the door frame receives the floor sensor input trigger during the lowering process, the door frame will immediately rise to the upright position, and the door frame will not retreat during the triggering period to prevent being hit during the lowering process. 

3. When planning and installing the advertising gate for the parking lot and setting up the parking system at the entrance and exit of the parking lot, it is necessary to make a selection based on the actual site conditions. For instance, some car owners may have difficulty controlling their speed when going uphill or downhill, and are prone to bump into the gate posts. Therefore, users must choose different access methods for the parking system based on the actual site conditions. 

In order to enhance the security level of the advertising gate, the following safety knowledge should be understood: 

When the brake lever drops, do not place any objects under the brake lever or allow anyone to stand or walk there. 

2. When the advertising gate power is off, first turn off the power supply, then manually rotate the swing to make it move until the braking lever is in a straight position. 

3. When the gate of the advertising barrier is in operation, no staff members are allowed to open the box cover or the box door to avoid any personal accidents. 

4. Before the gate of the advertising barrier is delivered from the factory, the wires should be laid inside the box. Unless there are special circumstances, the user should not make any changes. Just connect a 220V power supply and it will work.